ISSUE: Flaps do not move


31 Oct 2020

Applies to

F3F template V5.0.1


Even after configuring flap mixes (via GV3, GV4), flaps do not function, remaining fixed at their calibrated neutral positions.


The cause is an error in the mixes for CH3 and CH4, which causes the CAL neutral mix to override all the other mixes in all flight modes. The problem only affects F3F template V5.0.1.


In channel CH3:RtFlap, the "CALneut" mix should have only FM1 ticked, all other FM's should be unticked. The same applies to CH4:LtFlap

Fixed in V5.0.2


Remember to test your setups thoroughly before flying.

Support page