Poke Channel

PokeChannel is a template for checking the channel assignments in your model. Select channel 1-7 using the throttle stick, and 'poke' the servo with the aileron stick.

PokeChannel can be used to:


  1. Copy the template to your eeprom, and make it active.
  2. Set the receiver number to the one normally used for your model; this will avoid the need to re-bind.
  3. Select a channel between 1 to 7 using the throttle stick (listen for voice confirmation).
  4. Apply aileron.

Safety note: if your model has a motor, disconnect from power source before activating the template.


Pokechannel demo


  • OpenTx 2.1+